4 Ways To Control Mold Growth in Your Home
Focus On The Following Four Tips
For fungus to grow, homeowners would need to have three major factors collide: spore presence, moisture, and organic matter. The trifecta is a perfect environment for mold to thrive. Much of this is hard to control. Spores are going to be present, as they move about freely via the air. They're going to land on items. The third criteria, though, can be closely monitored. Residents should focus on the following four tips for reducing water damage to minimize exposure levels.
1. Clean Spills Immediately
The enemy really is fluid. Allowed to linger, it saturates and permits the spores to reproduce. At that point, mold growth can get out of control fairly quickly, within one to two days infesting various rooms. Be cognizant, therefore, of thoroughly wiping up floods or spills. Wipe surfaces down, especially after shows and baths. It's important that anything saturated is dried out within the first twenty-four hours. If it goes on longer, contact a water restoration company in Ellijay, NC, to aid in the repairs.
2. Don't Put Off Plumbing Repairs
Minor leaks and drips could become serious conditions. Monthly check faucets and below sinks for water damage, looking for signs of rust, discoloration, or stains. Don't neglect this trouble. The longer is trickled, the more moisture accumulates. Plumbers should fix the source, cutting off the supply.
3. Run Your Air Systems
Humidity levels should remain between 30 to 60% at all times. This could be hard to manage while cooking, doing wash, or taking warm showers. Be sure to run the air conditioner as it establishes cooler temperatures and helps extract wetness. If this isn't enough, use vents, fans, and dehumidifiers to gain additional control.
4. Schedule Regular Home Inspections
Sometimes it's tempting to put off maintenance calls, but these assessments aid in mold prevention. Roofers should look over shingles, replacing breaks, or cracked pieces. Plumbers can perform leak inspections every so often, determining the safety of the equipment. The HVAC device should have bi-annual attention, changing filters, cleaning lines, and ensuring proper function.
You do have the ability to deal with water damage. Act promptly, and take preventative measures seriously.